There are two cleaning-related factors that can cause your leather to wear prematurely.  The first is dirt, and the second is oil from your skin.  The oil from your skin is actually the most damaging to your leather.  This is particularly true when you wear shorts or a tank top, and have recently applied lotion or sunscreen to your skin.  Take this into consideration when determining your cleaning schedule.

 

Unlike fabric or vinyl upholstery, leather should be cleaned one section at a time.  This means that once you have applied your cleaner or conditioner to one area, you should fully wipe down that area, and then proceed to the next and so on.  Work on an area no larger than 2 to 3 square feet at a time.

 

If you have a dark-coloured leather interior, We recommend cleaning twice a year.  Light-coloured leather will need more frequent cleaning, even as often as every 3 months, depending on how readily the dirt shows.  In between cleanings, use a clean, damp towel to wipe down the surface completely.  This removes the dust and light soiling so it won’t have a chance to work into your leather.

 

Follow these steps to clean your car's leather:

 

(a) Apply the leather cleaner of your choice one section at a time, and work the solution into a nice lather with a sponge.  If your leather is heavily soiled, use an upholstery (interior detailing) brush.

 

(b) When finished scrubbing, be sure to remove all soap from the surface with a damp towel.

 

(c) Rinse and wipe several times, and then dry the leather with a fresh, dry terry cloth towel. By the way, water will not hurt your leather.  Most leather is actually made (tanned) in water.

 

(d) After your car's leather has dried, apply the leather conditioner of your choice.  Choose a leather protector that gives you the look you want (matte to shiny).

 

(e) Just as in cleaning, apply leather conditioner one section at a time.  Using a foam wax applicator, work the conditioner in thoroughly.  Allow the conditioner to soak in 1 to 2 minutes, then buff off the excess with a dry terry cloth towel or microfibre towel.  It's important to buff off the excess.  If you allow the excess to stay, your seats will be slippery.  After a few minutes of soak time, your leather has taken in all the moisture it can.  The remainder will simply evaporate, leaving that nasty film on the inside of your windows.